158 en | Connection
1
2
Figure 6.67 Connector assembly drawing
Figure 6.68 Connector components
This procedure shows how to make the cable-connector.
The procedure has these parts:
–
–
–
–
–
–
–
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
3
2
1
3
4
Prepare (refer to Section Prepare, page 159).
Remove the ends from the copper wires (refer to Section Remove the ends of the copper
wires, page 161).
Attach the socket contacts (refer to Section Attach the socket contacts, page 162).
Remove the ends from the optical fibers (refer to Section Remove the sheath from the
optical fibers, page 163).
Attach the ferrules (refer to Section Attach the ferrules, page 165).
Assemble the connector (refer to Section Assemble the connector, page 167).
Crimp the bush (refer to Section Crimp the bush, page 160).
Installation and Operation manual
5
4
5
7
6
8
Conference System
8
7
6
Bosch Security Systems B.V.