Conference System
6.8
DCN-DIS Discussion Unit (wired)
Connect the discussion unit to the DCN with the DCN cable. You can use the DCN socket to
make a loop-through with the discussion unit.
NOTICE!
You can move the DCN cable from the rear side to the bottom side of the discussion unit
(refer to Section 5.4 DCN-DIS and DCN-WD Discussion units).
You can use the cable-to-unit clamps to lock DCN cables to discussion units.
Figure 6.23 Cable-to-unit clamp
Bosch Security Systems B.V.
1
2
Installation and Operation manual
Connection | en 127
DCN-NG_IOM_V4.1 | V1.3 | 2012.07