Dcn-Fcs Channel Selector - Bosch DCN Next Generation Installation And Operation Manual

Conference System
6.18

DCN-FCS Channel Selector

Connect the channel selector to the DCN with the DCN cable. You can use the DCN socket to
make a loop-through with the channel selector.
External headphones socket
You can connect an external headphones socket to the channel selector (e.g. a 6.3 mm
headphones socket). The external headphones socket must be connected to a plug or to
solder pads.
Figure 6.38 External headphones, connection (1)
Figure 6.39 External headphones, connection (2)
The solder pads and the plug are internally connected.
Plug (pin)
1
2
3
Table 6.23 External headphones, connection
Bosch Security Systems B.V.
X18 X17 X16
3 2 1
Solder pad
X18
X16
X17
Installation and Operation manual
Connection | en 137
Signal
Left
Right
Common
DCN-NG_IOM_V4.1 | V1.3 | 2012.07