96
en | Installation
Figure 5.6 Template for recess mounting (refer to *.dwg file on the DVD supplied with the central control
unit)
Use screws with a length of 6.5 mm (refer to Figure 3.16, no. 17) when attach the Concentus
unit to the bottom of the recess. The distance between the centres of the screw holes is 100
mm.
5.4
DCN-DIS and DCN-WD Discussion units
General
CAUTION!
Do not open the wireless discussion unit. Any hardware change makes the product
certificates invalid. Only qualified personnel may open the wireless discussion unit.
Rims
With a rim, the look of the discussion unit can be changed. The discussion units are supplied
without rims. Attach a DCN-DISR Rim before you install the discussion unit.
Refer to the following figures for instructions that tell you how to attach a rim to a discussion
unit.
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
266
center line for R495.5
center line for
R696.5
100
598(2x) Dim for center R696.5
Installation and Operation manual
Conference System
Bosch Security Systems B.V.