166 en | Connection
Figure 6.87 Crimping ferrules (1)
23. Close and open the tool to crimp the ferrule onto the core of the fiber.
24. Repeat steps 20 to 23 for the other fiber in the cable. The ferrules only have been
25. Put both ferrules in the crimping tool (tool 3).
Figure 6.88 Crimping ferrules (2)
26. Crimp the ferrules on the sheath using the crimping tool (tool 3). Refer to the figure for
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
crimped on the core of the optical plastic fiber. The next step crimps the ferrules on the
sheaths of the fibers.
the result of this part of the cable-connector assembly procedure.
Installation and Operation manual
Conference System
Bosch Security Systems B.V.