Bosch DCN Next Generation Installation And Operation Manual page 105

Conference System
Block-mounting
Use the block-mounting method to install flush-mounted devices in surfaces with a
thickness > 2 mm. The block-mounting method uses the DCN-FEC End Caps, DCN-FCOUP
Couple Pieces and DCN-FPT Flush Positioning Tool.
Figure 5.20 Example, block mounting method
Bosch Security Systems B.V.
TORX 8
01
03
Installation and Operation manual
Installation | en 105
TORX 8
02
04
DCN-NG_IOM_V4.1 | V1.3 | 2012.07