Bosch DCN Next Generation Installation And Operation Manual page 202

202 en | Configuration
Operation
The CobraNet Settings window shows the CobraNet devices on the CobraNet network and
their CobraNet parameters.
Figure 7.11 CobraNet Settings window
To decrease the width of a column:
1.
2.
3.
To increase the width of a column:
1.
2.
3.
To change the value of one parameter of a device:
1.
2.
3.
NOTICE!
To change the values of more than one parameter at the same time, use the Advanced
configuration window (refer to Figure 7.8).
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
Click-and-hold the left mouse button on the right boundary of the column.
Move the mouse to the left to decrease the width of the column.
Release the left mouse button.
Click-and-hold the left mouse button on the right boundary of the column.
Move the mouse to the right to increase the width of the column.
Release the left mouse button.
Click on the device with the left mouse button.
Click on the parameter with the right mouse button.
Change the value of the parameter.
Installation and Operation manual
Conference System
Bosch Security Systems B.V.