Dcn-Fpt Flush Positioning Tool; Dcn-Ddi Dual Delegate Interface - Bosch DCN Next Generation Installation And Operation Manual

Conference System
3.13

DCN-FPT Flush Positioning Tool

When using the block-mounting method to install flush-mounted devices, the DCN-FPT Flush
Positioning Tool can be used to measure the distance between two couple pieces.
Figure 3.30 Flush positioning tool
The following sections give more information about the mentioned subject:
–
–
3.14

DCN-DDI Dual Delegate Interface

Use the DCN-DDI Dual Delegate Interface to connect contribution devices with flush-mounted
devices.
7
6
Figure 3.31 Dual delegate interface
The dual delegate interface contains:
1.
2.
3.
4.
5.
Bosch Security Systems B.V.
Connection: Section 5.6 DCN-Flush mounted products.
Technical Data: Section 11.2.13 DCN-FPT Flush Positioning Tool.
8
DCN cable - Connects the dual delegate interface to the DCN.
Mode selector - Sets the mode in which the dual delegate interface operates.
Intercom socket - Connects an DCN-ICHS Intercom Handset to the dual delegate
interface.
Voting/Control inputs - Connect DCN-FMICB Microphone Control Panels, DCN-FPRIOB
Microphone Priority Panels and DCN-FV(CRD) Voting Panels to the dual delegate
interface.
Lid - Gives access to the controls inside.
Installation and Operation manual
5
System Overview | en
1
2
3
4
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
41