56
en | System Overview
3.
4.
5.
6.
The following sections give more information about the mentioned subject:
–
–
–
–
3.28
LBB4114/00 Trunk Splitter
Use the LBB4114/00 Trunk Splitter to divide the DCN trunk.
Figure 3.56 Top and side views
The trunk splitter contains:
1.
2.
3.
4.
The following sections give more information about the mentioned subject:
–
–
–
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
DCN socket (trunk) - Makes a loop-through in the trunk of the DCN system.
DCN sockets (tap-off) - Make tap-offs in the DCN system. The socket regenerates the
DCN system signal.
Power inlet - Mains power supply connection.
Fuse holder - Prevents damage to the internal power supply unit of the extension power
supply.
Installation: Section 5.8 DCN-EPS Extension Power Supply.
Connection: Section 6.21 DCN-EPS Extension Power Supply.
Configuration: Section 7.16 DCN-EPS Extension Power Supply.
Technical Data: Section 11.2.27 DCN-EPS Extension Power Supply.
1
4
DCN socket (tap-off 1) - Makes a tap-off in the DCN system. The socket regenerates the
DCN signal.
DCN socket (tap-off 2) - Makes a tap-off in the DCN system. The socket regenerates the
DCN system signal.
DCN cable - Connects the trunk splitter in the trunk of the DCN system.
DCN socket (trunk) - Makes a loop-through in the DCN with the trunk splitter. The socket
does not regenerate the DCN system signal.
Installation: Section 5.9 LBB4114/00 Trunk Splitter.
Connection: Section 6.22 LBB4114/00 Trunk Splitter.
Technical Data: Section 11.2.28 LBB4114/00 Trunk Splitter.
Installation and Operation manual
2
3
Bosch Security Systems B.V.
Conference System