Wireless Access Point Led Behavior - Bosch DICENTIS Configuration Manual

26 en | Wireless Access Point LED behavior
6

Wireless Access Point LED behavior

The LEDs on the front panel of the Wireless Access Point (DCNM-WAP) give information on the
(configuration) status of the Wireless Access Point.
A B C
Figure 6.1: DCNM-WAP status LEDs
Blue (A)
Flashing
On
Flashing
On
On
Flashing
On
Off
Off
Table 6.1: Status LEDs
2015.03 | V1.0 |
C B A
Red (B) Blue (C)
Off Off
Off Off
Flashing Flashing
Flashing Off
Flashing On
Off On
Off On
Flashing Off
Off Off
Configuration manual
Description
– No DCNM-WD(E) connected yet.
– Subscription mode is off.
– At least one DCNM-WD(E) is connected.
– Subscription mode is off.
– The DCNM-WAP is starting‑up.
– DCNM-WAP software upgrade active.
– DCNM-WD(E)s software upgrade active.
– Subscription mode is on.
– No DCNM-WD(E)s connected yet.
– Subscription mode is on.
– At least one DCNM-WD(E) is connected.
– System is in Power off mode.
– No DC power supply connected.
DICENTIS
Bosch Security Systems B.V.