Drive Chain Lubrication And Cleaning - Honda NT650 Owner's Manual

Lubrication and cleaning:
Lubricate every 600 miles (1,000 km) or
sooner if chain appears dry. The О-rings
in this chain can be damaged by steam
cleaning, high pressure washers, and
certain solvents. Clean the chain with high
flash-point solvent, such as kerosene.
Wipe dry and lubricate only with SAE 80
or 90 gear oil.
lubricants may contain solvents which
could damage the rubber O-rings. Chain
Replacement: See (page 2).
Commercial c h a i n
D
R
I
V
E
T
R
A
I
N
67