Seat Removal - Honda ST1300 2007 Owner's Manual

Seat Removal

front seat
prong B
rear seat
recesses holes
prongs
latch lever
open
seat opener
recesses
ignition key
prongs A
seat height adjuster
To Remove the Rear Seat
Insert the ignition key and turn it clockwise to open the latch lever. Pull the rear
seat back and up while depressing a seat opener.
To Remove the Front Seat
Pull the front seat back and up.
To Install the Front Seat
Insert the prongs A into the recesses. Insert the prong B into the seat height
adjuster. Push down on the rear of the front seat.
Be sure to align the holes in the rear of the front seat with the adjuster when you
install the front seat.
To Install the Rear Seat
Install the front seat. Insert the prongs into the recesses under the frame cross
member and then push down on the rear of the rear seat. Close the latch lever
and turn the ignition key counterclockwise.
Be sure the seat is locked securely in position after installation.
84
Servicing Your Honda