Saving An Image; General; Image Capacity; Naming Convention - FLIR E6-XT User Manual

7
Operation
• Push and hold the button for less than 5 seconds to put the camera in standby
mode. The camera then automatically turns off after 48 hours.
• Push and hold the button for more than 10 seconds to turn off the camera.

7.3 Saving an image

7.3.1 General

You can save multiple images to the internal camera memory.

7.3.2 Image capacity

Approximately 500 images can be saved to the internal camera memory.

7.3.3 Naming convention

The naming convention for images is FLIRxxxx.jpg, where xxxx is a unique counter.

7.3.4 Procedure

Follow this procedure:
1. To save an image, pull the trigger.

7.4 Recalling an image

7.4.1 General
When you save an image, it is stored in the internal camera memory. To display the im-
age again, you can recall it from the internal camera memory.
7.4.2 Procedure
Follow this procedure:
1. Push the Archive button
2. Push the navigation pad left/right or up/down to select the image you want to view.
3. Push the center of the navigation pad. This displays the selected image.
4. To return to live mode, push the Cancel button
button .
#T559828; r. AP/56791/57153; en-US
.
repeatedly or push the Archive
13