System Messages; Status Messages; Warning Messages - FLIR ThermaCAM EX320 User Manual

10 – Camera program
10.2
10.2.1
Status messages are displayed at the bottom of the screen, or in the top left part of
the screen. Here you will find information about the current status of the camera.
Figure 10.2 Status messages – a few examples
Message
Frozen
Manual
Please wait
Restarting
Saving as
10.2.2
Warning messages are displayed in the center of the screen. Here you will find impor-
tant information about battery status, for example.
Figure 10.3 Critical camera information – a few examples
Message
Battery low
Shutting down
10
Shutting down in 2 seconds
66

System messages

Status messages

Explanation
Message is displayed when the image is frozen.
Message is displayed when the camera is currently in manual adjust
mode.
Message is displayed during operations that take some time.
Message is displayed when the software is restarted, i.e. after Fac-
tory default.
Message is displayed while an image is being saved.

Warning messages

Explanation
The battery level is below a critical level.
The camera will be switched off immediately.
The camera will be switched off in 2 seconds.
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006