Changing The Temperature Range; Selecting A Suitable Color Palette; Procedure; Enabling Or Disabling Histogram Mode - FLIR GFx320 User Manual

16 Achieving a good image

16.4.3 Changing the temperature range

16.4.3.1 Procedure

Follow this procedure to change the temperature range:
1. Do one of the following:
• Push the temperature range button on the left side of the camera.
• Push the button, then select Adjust temp. range.
2. Move the joystick up/down to choose a suitable temperature range for your object.
3. Push the temperature range button to confirm and leave the setup mode.

16.5 Selecting a suitable color palette

16.5.1 Procedure
1. Turn the mode wheel to
2. Push the button to display a menu.
3. Move the joystick left/right to go to the Image tab.
4. Move the joystick up/down to go to select Color palette.
5. Push the joystick to enable the list of palettes.
6. Move the joystick up/down to select a new palette.
7. Push the joystick.
8. Push the button to leave the setup mode.

16.6 Enabling or disabling histogram mode

16.6.1 General

Histogram mode is an image-displaying method that evenly distributes the color informa-
tion over the existing temperatures of the image.
16.6.2 Procedure
1. Turn the mode wheel to
2. Push the button to display a menu.
3. Move the joystick left/right to go to the Image tab.
4. Move the joystick up/down to go to select Histogram.
5. Push the joystick to enable/disable the setting.
6. Push the button to leave the setup mode.
16.7 Enabling or disabling inverted color
palette
16.7.1 Procedure
1. Turn the mode wheel to
2. Push the button to display a menu.
3. Move the joystick left/right to go to the Image tab.
#T810169; r. AN/42241/42268; en-US
or .
or .
or .
46