Changing System Settings; Changing Language; Changing Temperature Unit; Changing Date Format - FLIR ThermaCAM E4 Operator's Manual

7.7 – Changing system settings
7.7

Changing system settings

7.7.1

Changing language

Step
1
2
3
4
5
7.7.2

Changing temperature unit

Step
1
2
3
4
5
7.7.3

Changing date format

Step
1
2
3
4
5
7.7.4

Changing time format

Step
1
2
18
Action
Press MENU/YES to display the vertical menu bar.
Point to Local Settings on the Setup menu and press MENU/YES.
Press the navigation pad up/down to select Language.
Press the navigation pad left/right to change the language.
Press MENU/YES to confirm your changes and leave the dialog box.
Action
Press MENU/YES to display the vertical menu bar.
Point to Local Settings on the Setup menu and press MENU/YES.
Press the navigation pad up/down to select Temp unit.
Press the navigation pad left/right to change the temperature unit.
Press MENU/YES to confirm your changes and leave the dialog box.
Action
Press MENU/YES to display the vertical menu bar.
Point to Local Settings on the Setup menu and press MENU/YES.
Press the navigation pad up/down to select Date format.
Press the navigation pad left/right to change the date format.
Press MENU/YES to confirm your changes and leave the dialog box.
Action
Press MENU/YES to display the vertical menu bar.
Point to Local Settings on the Setup menu and press MENU/YES.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004