Cabletron Systems SmartSwitch Router Reference Manual page 94

-IPX-E-ERIPNOSHOWELEM No shadow show entry available
Explanation:
This message appears when IPX cannot get a free slot in the shadow show entry array.
There can be a maximum of 20 active shows combined from all the telnet session.
Recommended Action:
Call Cabletron Technical support if you see this error.
-IPX-E-ERIPCLINOMEM Cannot allocate memory for CLI
Explanation:
This message appears when IPX cannot allocate memory for CLI bulk printf buffer.
Recommended Action:
If possible, remove some IPX entries to free up memory.
-IPX-E-NOCHANNUM Invalid channel number -- <number>
Explanation:
This message appears when a user inputs an invalid channel number. Valid channel
numbers range from ? to ?.
Recommended Action:
Enter a valid channel number.
-IPX-E-INTFNAMETOOLONG Interface Name <interface_name> is longer
than allowed max length <max_length_allowed>
Description :
The inputted interface name is too long.
12 - 4
Chapter 12: IPX Protocol Error Messages
SSR-8 Error Reference Manual