Cabletron Systems SmartSwitch Router Reference Manual page 79

Recommended Action:
Please call Cabletron Technical Support for information about this message.
-INTERFACE-E-EXISTS Interface <interface_name> has already been created.
Please use another name for the interface.
Explanation:
This message appears when the user is attempting to create an interface with a name
which is already being used by another interface.
Recommended Action:
Use another name for the interface being created.
-INTERFACE-E-IFNONE No IP interfaces found.
Explanation:
This message appears when the user is trying to display information for all interfaces
of a particular type, but no interfaces matching the request were found.
Recommended Action:
None
-INTERFACE-E-IFNOTIP An IP address cannot be configured on interface
<interface-name> because the interface does not support IP.
Explanation:
This message appears when the user is attempting to configure an IP (IPX) address on
an interface that does not support IP (IPX).
SSR-8 Error Reference Manual
Chapter 10: Interface Configuration Error Messages
10 - 5