Cabletron Systems SmartSwitch Router Reference Manual page 81

-INTERFACE-E-NOEXIST Interface <interface_name> does not exist. Please
check the name and try again.
Explanation:
This message appears when a command refers to an interface which does not exist.
Usually, this occurs if the interface name is typed in incorrectly.
Recommended Action:
Check the name of the interface in the command that failed, and make sure that it
matches the name of an interface that has already been created.
-INTERFACE-E-NOSUCHIF Interface <interface_name> was not found or is not
configured with any 'IP' addresses.
Explanation:
This message appears when the user is trying to show information about an interface
that does not exist, or is not configured with the protocols of interest to the user.
Recommended Action:
Check the name of the interface.
-INTERFACE-E-NOSUCHPORT Port doesn't exist on this system.
Explanation:
This message occurs when a port is not found by the system even though the module
exists.
Recommended Action:
Please call Cabletron Technical Support for information about this message.
SSR-8 Error Reference Manual
Chapter 10: Interface Configuration Error Messages
10 - 7