-DVMRP-E-DUPTNL
Explanation:
This message appears when the tunnel <tunnel-name> already has been defined
between specified local and remote addresses.
Recommended Action:
Verify DVMRP tunnel name.
-DVMRP-E-IFNOTFOUND <interface_name>: no such interface address.
Explanation:
This message appears when if the specified interface or IP-address does not exist.
Recommended Action:
Verfiy interface and IP-address.
-DVMRP-E-MEMORY Not enough memory
Explanation:
This message appears when the DVMRP service runs out of memeory.
Recommended Action:
If possible, remove some DVMRP service. Otherwise please call Cabletron Systems
technical support.
-DVMRP-E-RECVFROM recvfrom() failed with errno <number>
Explanation:
This message appears when the DVMRP service is not able to receive data.
Recommended Action:
Please call Cabletron Systems technical support.
7 - 4
Chapter 7: DVMRP Error Messages
Tunnel <tunnel-name> is already defined
SSR-8 Error Reference Manual
Need help?
Do you have a question about the SmartSwitch Router and is the answer not in the manual?
Questions and answers