Cabletron Systems SmartSwitch Router Reference Manual page 188
Error reference manual
Hide thumbs
Also See for SmartSwitch Router:
- User's reference manual (338 pages) ,
- User's reference manual (207 pages)
Table of Contents
Advertisement
Recommended Action:
If you want to turn off auto-negotiation on gigabit ethernet ports and set port to full
duplex and 1000 Mbits speed, turn off auto-negotiation on the port. This is also useful
when connected to a buffered repeater.
Error Messages
-SYS-E-NOAUTOSPEEDDUPLEX
Explanation:
These are mutually exclusive configurations.
Recommended Action:
Set port to auto-negotiate OR manually configure speed and duplex settings.
-SYS-E-BAD_IPP_MEM Bad IPP Memory at 0x<hex_value> on channel <num-
ber>
Explanation:
Module in slot number corresponding to 'channel' number has failed.
Recommended Action:
Replace line card module.
-SYS-E-BAD_PORT_MEM Bad Memory at 0x<hex_value> on port
<port_number>
Explanation:
Specified port has failed diagnostics.
Recommended Action:
Replace line card module.
29 - 4
Chapter 29: SYS Error Messages
Cannot set both Auto-negotiate and speed/
duplex at same time
SSR-8 Error Reference Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartSwitch Router and is the answer not in the manual?
Questions and answers