Aggrgen Error Messages - Cabletron Systems SmartSwitch Router Reference Manual

Chapter 2
This chapter describes the error messages for the AGGRGEN facility.
Error Messages
-AGGRGEN-E-DSTIDEXIST Aggr-Gen destination <name> already exists.
Explanation:
This message appears when the identifier (tag) assigned to a new aggr-gen-dest CLI
command is already being used.
Recommended Action:
Use a different (unique) identifier (number or string)
-AGGRGEN-E-DSTNOTFOUND Aggr-Gen destination <name> not found.
Explanation:
This message appears when the "destination" parameter in the "aggr-gen" CLI
command is invalid.
Recommended Action:
Correct the destination parameter name.
-AGGRGEN-E-DSTOVFL No more free aggr-gen destination (max <number>
current <number>)
Explanation:
This message appears when the maximum number of "aggregate-generation
destination" entries has been reached.
Recommended Action:
If possible, negate unused aggr-gen-dest commands.
SSR-8 Error Reference Manual
Chapter 2: AGGRGEN Error Messages

AGGRGEN Error Messages

2 - 1