Error Messages - Cabletron Systems SmartSwitch Router Reference Manual

Recommended Action:
None.

Error Messages

-L2TM-E-CREATE_TMR timer creation failed (retCode <number>)
Explanation:
This message appears when, during initialization (system boot), the L2 task could not
create a timer resource (used to age-out MAC addresses).
Recommended Action:
Restart the system. If the problem persists, call Cabletron Technical Support.
-L2TM-E DMND_DEL could not remove enough entries from L2 table (port
<port_id>)
Explanation:
This message appears when a port's table is almost full. Some MAC addresses were
automatically removed. However, not enough entries were found (more entries were
expected).
Recommended Action:
The software and hardware view of the MAC tables may be out of sync. If this message
is frequently displayed please call Cabletron Technical Support
-L2TM-E FLT_CONFLICT <string>
Explanation:
This message appears when multiple L2 filters have been configured and there are
conflicts between 2 of them (contradictory configuration).
SSR-8 Error Reference Manual
Chapter 13: Level 2 Table Manager Error Messages
13 - 5