Cli Error Messages; Warning Messages - Cabletron Systems SmartSwitch Router Reference Manual

Chapter 4
This chapter describes the error messages for the Command Line Interface facility.

Warning Messages

-CLI-W-CHANGES Uncommitted configuration changes exist.
Explanation:
The user is attempting to logout or exit but there are non-committed configuration
changes in the scratchpad.
Recommended Action:
If you want to commit those changes, you should abort the logout and commit your
changes.
-CLI-W-MODNOTFOUND <Module_name>: module '<number>' does not exist -
ignoring
Explanation:
The user is refering to a physical module that is not currently available on the system.
This warning message indicates that the command the user specified will not have an
effect on the module since the module doesn't exist..
Recommended Action:
Verify physical module exists in SSR before attempting to configure the specified
module.
-CLI-W-NOHISTENT non-existent history entry '<command_name>'
Explanation:
The user tried to recall a command that doesn't exist in the command history buffer.
SSR-8 Error Reference Manual
Chapter 4: CLI Error Messages

CLI Error Messages

4 - 1