10Base-T Ethernet Driver Error Messages; Warning Message; Error Messages - Cabletron Systems SmartSwitch Router Reference Manual

Chapter 8
This chapter describes the error messages for the 10Base-T Ethernet Driver facility.

Warning Message

-ETH-W-BIGFRAME <name> <number>: bad received packet length, <number>
bytes
Explanation:
Packet received off the network was larger than legal ethernet size.
Recommended Action:
Use packet sniffing tool to determine which host is sending illegal frames.

Error Messages

-ETH-E-DIAGFAIL 10Base-T port failed internal diagnostics
Explanation:
10Base-T port on Control Module failed diagnostics or initialization.
Recommended Action:
Replace the Control Module.
-ETH-E-NOTFDS insufficient transmit buffers
Explanation:
Insufficient transmit buffers in 10Base-T port.
SSR-8 Error Reference Manual
Chapter 8: 10Base-T Ethernet Driver Error Messages
10Base-T Ethernet Driver Error
Messages
8 - 1