Cabletron Systems SmartSwitch Router Reference Manual page 103

-L2TM-E PORT_CLEANUP
ber> dst<number> flow<number> mgt<number>)
Explanation:
This message appears when a port was hot-swapped (out) and not all of its related
information could be successfully removed
Recommended Action:
None
-L2TM-E REL_SEMA4 failed releasing sema4 (retCode <number>)
Explanation:
This message appears when the lock used to guarantee the integrity of the MAC
address table could not be released.
Recommended Action:
If this message is displayed continuously please call Cabletron Technical Support.
-L2TM-E START_TMR failed to start timer 0x<hex_number> (retCode <num-
ber>)
Explanation:
This message appears when, during initialization (system boot), the L2 task could not
start a timer (used to age-out MAC addresses).
Recommended Action:
Restart the system. If the problem persists, call Cabletron Technical Support.
SSR-8 Error Reference Manual
Chapter 13: Level 2 Table Manager Error Messages
Unsuccessful port cleanup (p <name> src <num-
13 - 7