Cabletron Systems SmartSwitch Router Reference Manual page 198

Recommended Action:
System will reboot. Run diagnostics on the system to ensure there are no memory
problems with the L3 table. If problem persists, call Cabletron Technical Support to
resolve the problem.
-SYS-F-L3TBLBAD entry to be deleted 0x<hex_value>, not found on channel
<number>, bucket <number>
Explanation:
This message appears when an L3 table entry was requested to be deleted on a channel
and not found.
Recommended Action:
System will reboot. Run diagnostics on the system to ensure there are no memory
problems with the L3 table. If problem persists, call Cabletron Technical Support to
resolve the problem.
-SYS-F-BADADDRFLUSH cache flush with bad virtual address,
'0x<hex_value>'
Explanation:
This message appears when the CPU was flushing a bad virtual address and the TLB
may be corrupt.
Recommended Action:
System will reboot. Ensure all line cards, CPU, fan, and backplane are seated well. Run
diagnostics on the system to ensure there are no system problems. If problem persists,
call Cabletron Technical Support to resolve the problem.
-SYS-F-BADNETBUF bad buffer '0x<hex_value>' from network interface
Explanation:
This message appears when the network interface chip on the Control Module
accessed an invalid memory location.
29 - 14
Chapter 29: SYS Error Messages
SSR-8 Error Reference Manual