Cabletron Systems SmartSwitch Router Reference Manual page 122

Recommended Action:
Verify interface name and re-enter command.
-OSPF-E-IFNOTFOUND <interface_name> is not a known interface in area
<area_name>.
Explanation:
An OSPF parameter has been configured for an interface that does not exist.
Recommended Action:
Verify interface name and re-enter command.
-OSPF-E-INSUFFAREASFORVLINK Vlinks present. Number of areas (<num-
ber>) with valid configuration less than 2.
Explanation:
An OSPF virtual link has been configured. There must be at least 2 valid areas
configured (backbone and one or more non-backbone areas).
Recommended Action:
Verify configuration of OSPF areas.
-OSPF-E-INVASTAG ASPath tag (<number>) greater than 4095. tag_value and
as options ignored.
Explanation:
This message appears when the tag value is out-of-range. The tag value must be within
the following range: (0..4095)
Recommended Action:
Adjust the tag value.
19 - 4
Chapter 19: OSPF Error Messages
SSR-8 Error Reference Manual