Cabletron Systems SmartSwitch Router Reference Manual page 80

Recommended Action:
Create another interface that supports the required protocol and then configure it with
the address.
-INTERFACE-E-IPADDREXISTS The IP address <IP_address> is already con-
figured on interface <interface_name>.
Explanation:
This message appears when the user is trying to configure the same address twice on
the system. This is not allowed.
Recommended Action:
Remove the command which generated this error from the configuration.
-INTERFACE-E-NAME <string> is not a valid host or network address
Explanation:
This message appears when a user supplies an invalid host or network address.
Recommended Action:
Please call Cabletron Technical Support for information about this message.
-INTERFACE-E-NAMETOOLONG The interface name <interface_name> is too
long. The name cannot be longer than 32 characters.
Explanation:
This message appears when the user has entered a name for an IP/IPX interface which
is too long.
Recommended Action:
Use a shorter name. The maximum allowed length is displayed in the error message.
10 - 6
Chapter 10: Interface Configuration Error Messages
SSR-8 Error Reference Manual