Cabletron Systems SmartSwitch Router Reference Manual page 160

-RCP-E-RCMD rcmd failed
Explanation:
This message appears when the SSR could not establish connection with the rcp server.
This could be caused if the server is not present, there is no route to the server, server
does not respond.
Recommended Action:
Verify that we have a route to the server, and the server is responding.
-RCP-E-REMOTE Remote error <error_type>
Explanation:
This message appears when some error occurred on the rcp server. Mostly this should
occur if the file specified on the rcp server does not exist, or there were permission
problems. The error should be printed out along with the message
Recommended Action:
Check if file exists on the rcp server and/or permissions are OK
-RCP-E-SOCK RCMD: Socket: <name>
Explanation:
This message appears when the SSR could not open a socket connection with the rcp
server
Recommended Action:
The rcp server is busy, try again later
23 - 6
Chapter 23: RCP Error Messages
SSR-8 Error Reference Manual