Cabletron Systems SmartSwitch Router Reference Manual page 182

created. This could be due to lack of resources. Please call Cabletron Systems technical
support.
-STP-E-FAILREGMGMTADDR failed to register bridge group address
Explanation:
This message appears when bridge group address is not registered.
Recommended Action:
This error is due to an invalid bridge management group address or vlan or port
number.
-STP-E-MCASTREG error registering multicast address - error=<error_code>
Explanation:
This message appears when the bridge group management address could not be
registered.
Recommended Action:
The error could be due to the registration table being full (-51) or the address is not a
multicast address (-55).
-STP-E-NOMEM processing error - insufficient memory
Explanation:
This message appears when memory could not be allocated.
Recommended Action:
This error is due to the unavailability of memory. Please call Cabletron Systems
technical support.
28 - 2
Chapter 28: STP Error Messages
SSR-8 Error Reference Manual