Ipx Protocol Error Messages - Cabletron Systems SmartSwitch Router Reference Manual

Chapter 12 IPX Protocol Error Messages
This chapter describes the error messages for the IPX Protocol facility.
-IPX-E-ERIPSTATRTFAIL Cannot add static route; route add failed
Explanation:
This message appears when an add static route failed because of lack of memory.
Recommended Action:
If possible, remove some static routes to free up memory, or contact Cabletron
Technical support if you wish to upgrade memory.
-IPX-E-ERIPSTATRTINTF Cannot define static route for the interface route
Explanation:
This message appears when IPX cannot make the interface routes static.
Recommended Action:
Verify interface is a directly attached network. You cannot add a static IPX route for a
directly attached network.
-IPX-E-ERIPSTATRTSHAD Cannot allocate memory for shadow static route
entry
Explanation:
This message appears when IPX cannot allocate memory for shadow static route entry.
Recommended Action:
If possible, remove some static routes to free up memory.
SSR-8 Error Reference Manual
Chapter 12: IPX Protocol Error Messages
12 - 1