Removing The Bottom Shelf; Disposal; Figure 74: Mechanical Lifting Device - Mellanox Technologies MIS5300 Hardware Installation Manual

InfiniBand Switch Platform Hardware User Manual
5. Put the container base (saved from the installation) on the fork lift.
6. Raise the container base to 1 cm below the level of the shelf.
7. Move the chassis away from the rack and onto the container base.
8. Put wedges around the chassis to prevent the chassis from rolling off of the container
base.
9. Move the chassis away from the rack.
10. Dispose of the Chassis in a legal and environmental way.
11. Go to the Mellanox website for detailed instructions for disassembly of the chassis
according to the WEEE Directive.
7.1.2

Removing the Bottom Shelf

1. Remove all of the bolts that are holding the shelf to the rack.
2. Remove the filler panels.
3. Remove the shelf.
4. Remove all of the caged nuts.
7.2

Disposal

Go to the Mellanox website for detailed instructions for disassembly according to the
WEEE Directive.
Mellanox Technologies

Figure 74: Mechanical Lifting Device

According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.
86