Table of Contents
Advertisement
InfiniBand Switch Platform Hardware User Manual
1.6.4
Installing the Cable Holder
1. Place the cable holder next to the rack, on the connector side of the chassis, and iden-
tify the holes where the caged nuts were placed in step 4
Mellanox Technologies
Now is the time to install the cable holder.
Figure 29: Cable Holder
The cable holders should go to the outside of the vertical supports.
Left side rack
Top side
14 X M6 caged nut
14 X M6 bolt for caged nut
Cable support shelf
For each model of
chassis there is the
one support shelf for
every two leafs.
37
Advertisement
Table of Contents
