Installation Kits; Package Contents; Table 9: Installation Kit According To Rack Size - Mellanox Technologies TX6100 MetroX Series Hardware User Manual

Infiniband long haul system
Hide thumbs Also See for TX6100 MetroX Series:
Table of Contents

Advertisement

MetroX 12-Port QSFP InfiniBand Long Haul System Hardware User Manual
The switch platform can be rack mounted and is designed for installation in a standard 19" rack.
The power side of the switch includes a hot-swap power supply module, a blank cover for an
optional second PS unit for redundancy, and a hot-swap fan tray. There are two possible air flow
directions. Be sure that the switch air flow direction is compatible with your system, rack, and PS
units. The connector side of the switch has the QSFP ports, system LEDs, and management con-
nection ports.
The switch platform contains auto-sensing 100 - 240 VAC connections for all possible PS units.
The installer should use a rack capable of supporting the mechanical and environmental charac-
teristics of a fully populated platform.
The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take pre-
cautions to guarantee proper ventilation in order to maintain good airflow at ambient
temperature. Cable routing in particular should not impede the air exhaust from the
chassis.
3.1.1

Installation Kits

There are two Installation kit options. One long and one short. Both the long and the short
switches can be mounted using the long rail kit.
Table 9 - Installation Kit According to Rack Size
Kit OPN
MSX60-BKIT
MSX60-SKIT
3.2

Package Contents

Before you install your new TX6100switch, unpack the system and check to make sure that all
the parts have been sent, check this against the parts list below. Check the parts for visible dam-
age that may have occurred during shipping.
The switch comes packed with the following items:
• 1 X – switch
• 1 X – installation kit
• 2 X – power cable one for each PS unit – Type C13-C14
• A single power cord for each power supply unit can be ordered at no extra charge
• 1 X – Harness
• HAR000028 – Harness RS232 2M cable – DB9 to RJ-45switches
• 1 X – Quick Start Guide
• 1 X – China RoHS statement
If anything is damaged or missing, contact your customer representative immediately.
For customer support go to:
www.mellanox.com
Rack Size
40-60 cm deep
60-80 cm deep
=>Support => Customer Support Portal Login
Mellanox Technologies
Rev 1.1
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Metrox mtx6100-2sfs

Table of Contents