IBM TotalStorage SAN32M-2 Installation And Service Manual page 250

Hide thumbs Also See for TotalStorage SAN32M-2:
Table of Contents

Advertisement

Event code: 070
Message:
E_Port is segmented.
Severity:
Informational.
Explanation:
An E_Port recognized an incompatibility with the attached director or switch, preventing fabric participation. A
segmented port does not transmit Class 2 or Class 3 traffic, but transmits Class F traffic. Refer to event data for
segmentation reason.
Action:
Action depends on segmentation reason specified.
Event data:
The first byte of event data (byte 0) specifies the E_Port number. The fifth byte (byte 4) specifies the segmentation
reason as follows:
1 = Incompatible operating parameters - Ether the resource allocation time out value (R_A_TOV) or error
detect time out value (E_D_TOV) is inconsistent between the switch and another director or switch. Modify the
R_A_TOV and E_D_TOV to make the values consistent.
2 = Duplicate domain ID - The switch has the same preferred domain ID as another director or switch) Modify
the Domain ID to make it unique.
3 = Incompatible zoning configurations - The same name is applied to a zone for the switch and another
director or switch, but the zones contain different zone members. Modify the zone name to make it unique, or
ensure zones with the same name contain identical zone members.
4 = Build fabric protocol error - A protocol error was detected during incorporation of the switch into the fabric.
Disconnect the E_Port link, then reconnect the link. If the condition persists, perform a data collection and return
the CD to support personnel.
5 = No principal switch - No director or switch in the fabric can become the principal switch. Modify the switch
priority to any value other than 255.
6 = No response from attached switch (hello timeout) - The switch periodically verifies operation of attached
directors or switches. The E_Port at the operational switch times out and segments if the attached device does
not respond. Check the status of the attached director or switch. If the condition persists, perform a data
collection and return the CD to support personnel.
Distribution:
Product
EFCM Basic
Event Log
224
SAN32M-2 Installation and Service Manual
Management Server
System
Event Log
Error LED
E-Mail
Call-Home
Host
Sense Info
Link Incident
Log

Advertisement

Table of Contents
loading

Table of Contents