112
SAN32M-2 Installation and Service Manual
MAP 300 error messages
Table 11
Error message
Never connected.
Link timeout.
Protocol mismatch.
Duplicate session.
Unknown network address.
Incorrect product type.
8
Transmit or receive errors for the Ethernet adapter exceeded a
threshold, the link was not connected, or the link timed out. A problem
with the Ethernet cable, Ethernet hub(s), or other LAN-attached
device is indicated. Verify the product is connected to the
management server through one or more Ethernet hubs:
a. Ensure an RJ-45 Ethernet cable connects the product to a hub.
If not, connect the cable as directed by the customer.
b. Ensure an RJ-45 Ethernet cable connects the management
server to a hub. If not, connect the cable as directed by the
customer.
c. Ensure Ethernet cables are not damaged. If damaged, replace
the cables.
Was the maintenance action successful?
NO
YES
↓
The management server connection is restored. Exit MAP.
9
Does the configuration use multiple daisy-chained Ethernet hubs?
YES
NO
↓
Go to
step
11.
Action
Go to
step
8.
Go to
step
8.
Go to
step
15.
Go to
step
18.
Go to
step
21.
Go to
step
23.