Table of Contents
Advertisement
Figure 28
Task 10: Configure the call-home feature (optional)
Date/Time Properties dialog box (Date & Time tab)
d. Click in the time field and enter the desired time, then click the
adjacent up or down arrow and select AM or PM.
e. Click Apply. Record date and time information for reference if
the server hard drive fails and must be restored.
6. Close all dialog boxes and return to the Windows desktop.
The management server has an optional call-home feature that
provides automatic dial-out through the internal modem to a service
support facility to report switch problems. The problem is logged into
the support facility's tracking system for resolution. To configure the
call-home feature:
1. There are two jacks on the server internal modem: one for the
call-home connection (LINE), and the other for a telephone
(PHONE). Ensure a telephone cable is routed and connected to
the LINE jack at the rear of the management server (connected
while performing
Task 6: Configure server password and network
addresses).
2. At the Windows desktop, double-click the Call Home Configuration
icon. The Call Home Configuration dialog box displays.
Chapter 2: Installation tasks
59
Advertisement
Table of Contents
