Table of Contents
Advertisement
Figure 36
Configure product parameters
Configure Identification dialog box
a. Type a unique product name of 24 alphanumeric characters or
less in the Name field. If the product is installed on a public
LAN, the name should reflect the network DNS host name.
b. Type a product nickname name of 24 alphanumeric characters
or less in the Nickname field. The nickname appears instead of
the WWN in Element Manager application views.
c. Type a description of 255 alphanumeric characters or less in
the Description field.
d. Type the physical location or 255 alphanumeric characters or
less in the Location field.
e. Type the name of a contact person (255 alphanumeric
characters or less) in the Contact field.
2. Click Activate to save the information and close the dialog box.
Perform this procedure to configure product operating parameters.
1. Set the product offline. Refer to
2. Select Operating Parameters and Switch Parameters from the
Configure menu at any view. The Configure Switch Parameters
dialog box displays
Set online state
(Figure
37).
Chapter 2: Installation tasks
for instructions.
73
Advertisement
Table of Contents
