Table of Contents
Advertisement
Configure management server names
Figure 23
52
SAN32M-2 Installation and Service Manual
5. Type the default Windows user name and password and click OK.
The server's Windows desktop opens and the SANavigator Log In
or EFCM Log In dialog box displays.
NOTE: The default Windows user name is Administrator and the
default password is password. Both are case-sensitive.
To configure the management server name and workgroup name:
1. At the Windows desktop, click Start at the left side of the task bar
(bottom of the desktop), then sequentially select Settings, Control
Panel, and System. The System Properties dialog box displays with
the General tab open by default.
2. Click the Network Identification tab. The System Properties dialog
box displays with the Network Identification tab selected.
3. Click Properties. The Identification Changes dialog box displays
(Figure
23).
Identification Changes Dialog Box
Advertisement
Table of Contents
