OSMS
FMS
68
SAN32M-2 Installation and Service Manual
•
FICON management server - Implementing and enabling FICON
host control of the product requires installation of the IBM System
Automation for OS/390™ (SA OS/390™) or z/OS
system. In addition, the FICON management server PFE key
must be installed. Refer to
instructions.
To configure the open systems management server:
1. Select Open Systems Management Server from the Configure menu
at any view. Two submenu options display:
• Enable OSMS.
• Host Control Prohibited.
2. Enable or disable OSMS by selecting the Enable OSMS option.
Check the box to enable the server.
3. Allow or prohibit host (OSI server) control by selecting the Host
Control Prohibited option. Check the box to prohibit a host
management program from changing configuration and
connectivity parameters on the product. The host program has
read-only access to configuration and connectivity parameters.
To configure the FICON management server:
1. Select FICON Management Server from the Configure menu at any
view. Three submenu options display:
• Enable FMS.
• Parameters.
• Zoning.
2. Enable or disable FMS by selecting the Enable FMS option. Check
the box to enable the server.
3. Click Parameters. The Configure FICON Management Server dialog
box displays
(Figure
Task 15: Configure PFE key (optional)
33).
®
operating
for