Table of Contents
Advertisement
128
SAN32M-2 Installation and Service Manual
b. Block the port. Refer to
Edition) or
Block or unblock a port
c. Clean fiber-optic connectors. Refer to
components.
d. Unblock the port. Refer to
Edition) or
Block or unblock a port
e. Monitor port operation for approximately five minutes.
Was the maintenance action successful?
NO
YES
↓
The product port is operational. Exit MAP.
9
Inspect and service host bus adapters (HBAs).
Was the maintenance action successful?
NO
YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
10
A connection is not allowed because of a switch binding or exchange
security attribute (ESA) feature mismatch. Switch binding parameters
must be compatible for both fabric elements. At the EFCM Basic
Edition interface or Element Manager, ensure switch binding is
enabled, the connection policy is compatible, and switch membership
lists are compatible for both elements.
•
EFCM Basic Edition - Refer to the EFCM Basic Edition User
Manual (620-000240) for instructions.
•
Element Manager - Refer to the Element Manager User Manual
(620-000242) for instructions.
Was the maintenance action successful?
NO
YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
11
A connection is not allowed because of a fabric binding mismatch.
Fabric membership lists must be compatible for both elements. At the
Block or unblock a port
(Element Manager).
Clean fiber-optic
Block or unblock a port
(Element Manager).
(EFCM Basic
(EFCM Basic
Advertisement
Table of Contents
