Chapter 4: Repair information
Procedural notes
Power on switch
© Copyright IBM Corp. 2006
This chapter describes repair-related procedures for the switch. The
procedures are performed at the switch, a browser-capable PC
communicating with the product-resident Enterprise Fabric
Connectivity Manager (EFCM) Basic Edition interface, or a
rack-mount management server running a storage area network
(SAN) management application. The chapter describes:
•
Procedural notes.
•
Powering the switch on or off.
•
Cleaning fiber-optic components.
•
Downloading firmware or software from the Filecenter.
•
Port light-emitting diode (LED) diagnostics.
•
Repair procedures - EFCM Basic Edition.
•
Repair procedures - SAN management application.
Observe the following procedural notes:
1. Follow all electrostatic discharge (ESD) precautions and
DANGER, CAUTION, and ATTENTION statements.
2. Before performing a procedure, read the procedure carefully and
thoroughly to familiarize yourself with the information.
To power on the switch:
1. One alternating current (AC) power cord is required for each
power supply. Ensure the correct power cords are available.
149