Gvrp Vlan-Creation-Forbid; Gvrp Registration-Forbid - Allied Telesis AT-8000S Cli Reference Manual

Layer 2 ethernet switch
Hide thumbs Also See for AT-8000S:
Table of Contents

Advertisement

Allied Telesyn AT-8000S Switch
CLI Reference Guide
Example
The following example sets the leave timer for Ethernet port 1/e6 to 900 milliseconds.
Console(config)# interface ethernet 1/e6
Console(config-if)# garp timer leave 900

gvrp vlan-creation-forbid

The gvrp vlan-creation-forbid Interface Configuration (Ethernet, port-channel) mode command disables
dynamic VLAN creation or modification. To enable dynamic VLAN creation or modification, use the no form of this
command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
Dynamic VLAN creation or modification is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command forbids dynamic VLAN creation from the interface. The creation or modification of dynamic VLAN
registration entries as a result of the GVRP exchanges on an interface are restricted only to those VLANs for
which static VLAN registration exists.
Example
The following example disables dynamic VLAN creation on Ethernet port 1/e6.
Console(config)# interface ethernet 1/e6
Console(config-if)# gvrp vlan-creation-forbid

gvrp registration-forbid

The gvrp registration-forbid Interface Configuration (Ethernet, port-channel) mode command
deregisters all dynamic VLANs on a port and prevents VLAN creation or registration on the port. To allow dynamic
registration of VLANs on a port, use the no form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Default Configuration
Dynamic registration of VLANs on the port is allowed.
Page 88

Advertisement

Table of Contents
loading

Table of Contents