Tacacs-Server Source-Ip; Show Tacacs - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide
Default Configuration
5 seconds
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the timeout value to 30.
Console(config)# tacacs-server timeout 30

tacacs-server source-ip

The tacacs-server source-ip Global Configuration mode command configures the source IP address to be used
for communication with TACACS+ servers. To return to the default configuration, use the no form of this
command.
Syntax
tacacs-server source-ip source
no tacacs-server source-ip source
Parameters
•
source — Specifies the source IP address.
Default Configuration
The source IP address is the address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
N/A
Examples
The following example specifies the source IP address.
Console(config)# tacacs-server source-ip 172.16.8.1

show tacacs

The show tacacs Privileged EXEC mode command displays configuration and statistical information about a
TACACS+ server.
Page 246