Show Ports Security Addresses - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed:
Console# show ports security
Port Status
---- -------
1/e1 Locked
1/e2 Unlocked
1/e3 Locked
The following table describes the fields shown above.
Field
Port
Status
Learning
Action
Maximum
Trap
Frequency

show ports security addresses

The show ports security addresses Privileged EXEC mode command displays the current dynamic addresses
in locked ports.
Syntax
show ports security addresses [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Learning Action
-------- -------
Dynamic Discard
Dynamic -
Disabled Discard,
Shutdown
Desc ription
Port number
Locked/Unlocked
Learning mode
Action on violation
Maximum addresses that can be associated on this port in Static
Learning mode or in Dynamic Learning mode
Indicates if traps are sent in case of a violation
Minimum time between consecutive traps
Maximum Trap
------- -------
3 Enable
28 -
8 Disable
Page 44
Frequency
---------
100
-
-