Show Snmp Filters - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of views.
Console# show snmp groups
Name
--------------
user-group
managers-group
managers-group
The following table describes significant fields shown above.
Field
Name
Security Model
Security Level
Views Read
Write
Notify

show snmp filters

The show snmp filters Privileged EXEC mode command displays the configuration of filters.
Syntax
show snmp filters [filtername]
Parameters
•
filtername—Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Security
Model Level
----- -----
V3 priv
V3 priv
V3 priv
Description
Name of the group.
SNMP model in use (v1, v2 or v3).
Authentication of a packet with encryption. Applicable only to the SNMP v3
security model.
Name of the view that enables only viewing the contents of the agent. If
unspecified, all objects except the community-table and SNMPv3 user and
access tables are available.
Name of the view that enables entering data and managing the contents of
the agent.
Name of the view that enables specifying an inform or a trap.
Views
Read Write
------- -------
Default ""
Default Default
Default ""
Page 180
Notify
-------
""
""
""