Chapter 28.802.1X Commands; Aaa Authentication Dot1X; Dot1X System-Auth-Control - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide

Chapter 28.802.1x Commands

aaa authentication dot1x

The aaa authentication dot1x Global Configuration mode command specifies one or more authentication,
authorization, and accounting (AAA) methods for use on interfaces running IEEE 802.1X. To return to the default
configuration, use the no form of this command.
Syntax
aaa authentication dot1x default method1 [method2...]
no aaa authentication dot1x default
Parameters
•
method1 [method2...] — At least one from the following table:
Keyword
Radius
None
Default Configuration
No authentication method is defined.
Command Mode
Global Configuration mode
User Guidelines
Additional methods of authentication are used only if the previous method returns an error and not if the request
for authentication is denied. To ensure that authentication succeeds even if all methods return an error, specify
none as the final method in the command line.
The RADIUS server must support MD-5 challenge and EAP type frames.
Examples
The following example uses the aaa authentication dot1x default command with no authentication.
Console(config)# aaa authentication dot1x default none

dot1x system-auth-control

The dot1x system-auth-control Global Configuration mode command enables 802.1x globally. To return to the
default configuration, use the no form of this command.
Syntax
dot1x system-auth-control
Description
Uses the list of all RADIUS servers for authentication
Uses no authentication
Page 282