Stack Reload; Stack Display-Order - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide

stack reload

Note
This command is operational in the AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/
48POE devices.
The stack reload Privileged EXEC mode command reloads stack members.
Syntax
stack reload [unit unit]
Parameters
•
unit— Number of the unit to be reloaded (Range: 1-6)
Default Configuration
All units are reloaded.
Command Modes
Privileged EXEC mode
User Guidelines
This command is not relevant to standalone devices.
If no unit is specified, all units are reloaded.
Example
The following example reloads Unit 2 of the stack.
Console(config)# stack reload unit 2

stack display-order

Note
This command is operational in the AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/
48POE devices.
The stack display-order Global Configuration mode command configures the order of the units in the display. To
return to the default configuration, use the no form of this command .
Syntax
stack display-order top unit bottom unit
no stack display-order
Page 236