Allied Telesis AT-8000S Cli Reference Manual page 295

Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays 802.1X statistics for the specified interface.
Console# show dot1x statistics ethernet 1/e1
EapolFramesRx: 11
EapolFramesTx: 12
EapolStartFramesRx: 12
EapolLogoffFramesRx: 1
EapolRespIdFramesRx: 3
EapolRespFramesRx: 6
EapolReqIdFramesTx: 3
EapolReqFramesTx: 6
InvalidEapolFramesRx: 0
EapLengthErrorFramesRx: 0
LastEapolFrameVersion: 1
LastEapolFrameSource: 00:08:78:32:98:78
The following table describes the significant fields shown in the display:
Field
EapolFramesRx
EapolFramesTx
EapolStartFramesRx
EapolLogoffFramesRx
EapolRespIdFramesRx
EapolRespFramesRx
EapolReqIdFramesTx
Description
The number of valid EAPOL frames of any type that have been received by
this Authenticator.
The number of EAPOL frames of any type that have been transmitted by
this Authenticator.
The number of EAPOL Start frames that have been received by this
Authenticator.
The number of EAPOL Logoff frames that have been received by this
Authenticator.
The number of EAP Resp/Id frames that have been received by this
Authenticator.
The number of valid EAP Response frames (other than Resp/Id frames)
that have been received by this Authenticator.
The number of EAP Req/Id frames that have been transmitted by this
Authenticator.
Page 293
802.1x Commands